AMADA RG100 PRESS BRAKE SERVICE MANUAL MANUALS
AMADA RG100 PRESS BRAKE SERVICE MANUAL MANUAL
AMADA RG100 PRESS BRAKE SERVICE MANUAL FULL

AMADA RG100 PRESS BRAKE SERVICE MANUAL FULL

Five minutes with a big crescent wrench got it tight and now the machine makes full pressure and works like a hot damn. When I pulled the cover off the reservoir I discovered that the large nut on the inside of the fitting was only finger tight and when I operated the machine all the oil was p*ssing back into the tank and never making to the ram. Pressurized fluid flows from the pump through a hard line that connects to a bulkhead fitting which in turn passes the fluid through the wall of the reservoir and on to the ram.Дў016 Chrysler Cirrus Haynes Repair Manual. On our machine the pump is in the reservoir and is chain driven by an externally mounted motor.

We got it for 1200 bucks because it wouldn't build any pressure-the seller just wanted it gone.

AMADA RG100 PRESS BRAKE SERVICE MANUAL MANUAL

I have it maxed out right now though.We have an older 48'/25T Promecam manual brake. I guess it is possible that the tonnage / max pressure control isn't working right instead. I haven't done any really high tonnage bending yet, but it does seem that when it works it is able to generate reasonable force. I'm thinking there is air in the control line or it is otherwise lossy in some way.

Sometimes you depress it and the ram comes up strongly, sometimes weakly (the ram rises partially and then you hear what sounds like hydraulic fluid bypassing), many times not at all. The foot control appears to be hydraulic, and it seems to be working weakly / sporadically, almost like bad brakes on a car that you need to pump.

I'm having some issues with the foot control on mine. In any case, I just wanted to post to this thread so we Promecam / Autobend users can find each other. If you have any further questions, call the Credit Department at 80. If you've never ordered from Amada before, please use the link below to complete our online credit application. Down the road it might be fun to create a custom touchscreen app with a rasberry pi or beaglebone black instead of the controller it has now.Дў018 Sea Ray Maintenance Manual here. My plan is to add a microcontroller to translate the display output to drive an IBM cash register VFD module just to get it working again.

AMADA RG100 PRESS BRAKE SERVICE MANUAL MANUALS

Fortunately, I have all the manuals / schematics.

Someone harvested the VFD (or was it LED?) display from it, but it still has the other boards. If you have question feel free to ask.I have a Promecam IT2-50-20 (50t, 2m) with an Autobend 5 as well. I have a similar press (mine is a rg-103) but the controller is different (hurco auto bend 5).

Amada rg100 press brake service manual